Primers for Plastic Surfaces
Polypropylene & FRP Primers
Product Description
Anupam PP Primer and Anupam FRP Primer are air drying single pack primers that promote excellent adhesion of coatings on polypropylene and FRP substrates. These primers provide excellent adhesion when topcoated with a wide range of finishes. These primers resist redissolving during topcoat application resulting in excellent holdout because they are insoluble or slightly soluble in most solvent used in topcoats.
Physical and Technical Data
| Colour | Pale Yellow Liquids |
| Dry Film Thickness | 1 - 2 microns |
| Thinner Intake | Not required |
| No. of Coats recommended | One coat only |
| Appearance | Smooth and clear |
| Compatibility with topcoats | Polyurethane, Epoxy and other organic topcoats |
| Recoatability | After 5 minutes and before 1 hour of application |
| Theoretical Coverage - (no loss) | 150 - 160 sq. ft. per litre |
| Packing | 1 litre, 5 litres and 20 litres |
| Method of Application | Spray / Cotton Swabbing |
Disclaimer
Information provided herein is based upon tests believed to be reliable. It does not guarantee the results to be obtained. Nor does it make any express and implied warranty or merchantability, or fitness for a particular purpose concerning the effects or results of such case. It does not release you from the obligation to test the products supplied by us as to their suitability for the intended uses. The application, surface preparation and use of the products are beyond our control and, therefore, entirely your own responsibility.